ROOFSKIN INFO
"Everything you need to know about RoofSkin-the high-performance, weatherproofing liquid membrane engineered to protect your roof for a lifetime."
Rapid Rain Resistance: Advanced moisture-triggered chemical cure that provides rapid rain resistance shortly after application, helping minimise the risk of wash-off during unpredictable UK weather.
Self-Levelling Formula: Low viscosity polyurethane liquid flows into minor-cracks and surface imperfections, curing to form a smooth, continuous waterproofing membrane.
Extreme Thermal Flexibility: Cures to form a highly elastic, rubber-like membrane that expands and contracts with the building structure through freezing winters and summer temperatures, resisting any splitting.
Simple Application: Designed as a straightforward, one- coat system under normal circumstances, it typically requires no primer on standard roof surfaces.
Preparation Is Everything: Before applying RoofSkin, the existing roof must be completely clean, dry and structurally sound.
Applying a liquid coating over a damp, soft, or damaged roof deck traps moisture inside the structure, which can cause bubbling, blistering, or premature failure. All compromised areas must be fully repaired or replaced before application.
If you need further help or advice regarding RoofSkin, our team is always here for you. Just give us a call or reach out online.
100% Volume Solids: What goes down stays down. With 100% volume solids RoofSkin retains its applied thickness during curing, with no solvent shrinkage and pinholing.
Solvent-Free & Virtually Odour Free: Completely solvent-free and virtually odour-free, with zero volatile organic solvents. This makes application more pleasant and suitable for domestic and commercial refurbishment projects.
Two part snap pack System: Supplied as a convenient pre-measured trade kit, ensuring the components are mixed at the correct manufacturer-specified ratio for consistent application.
No Structural strip outs: Bonds directly to suitable flat roof surfaces, potentially avoiding the cost and disruption of removing existing roofing materials.
Primer Free On Standard Surfaces: Normally requires no adhesion primer on clean, sound, non porous surfaces. Dedicated primers may be required for porous substrates such as raw concrete or timber.
Cold-Applied Roller System: Applied using standard trade paint rollers and brushes, with no gas torch or hot works or specialist spray equipment required.
